Skip to main content
BenitezLandscaping Pro Services, home

Paver Patio Cost in Northern Virginia, DC, and Maryland

What a paver patio costs in Northern Virginia, DC, and Maryland, what drives the price up or down, and the local rules to know before you build.

Most homeowners in Northern Virginia, Washington, DC, and suburban Maryland pay about $22 to $38 per square foot for a professionally installed paver patio. Here is what that looks like for common sizes:

Patio size Typical footprint Planning range
150 sq ft 10 x 15 ft, a bistro table and two chairs $3,300 to $5,700
300 sq ft 15 x 20 ft, dining for six plus a grill $6,600 to $11,400
450 sq ft 18 x 25 ft, separate dining and lounge areas $9,900 to $17,100

These are planning ranges, not quotes. The real price depends on your site, and a good installer will only commit to a number after walking the yard. The same ranges power our free yard planner, so you can rough out a full project, patio plus planting and lighting, in a couple of minutes.

The rest of this guide explains where the money goes, what makes one patio cost twice as much as another, and the local rules worth knowing before you build in the DC metro area.

What is included in a properly built patio

The pavers you walk on are the smallest part of the work. A patio that stays flat for decades is built in layers:

  1. Excavation. Sod and soil come out, usually 8 to 10 inches deep for a walking patio, and deeper where the clay is soft or wet.
  2. Compacted base. About 6 inches of crushed stone, spread and compacted in layers with a plate compactor. This is what keeps the surface from sinking.
  3. Bedding sand. A screeded 1 inch layer of coarse sand that the pavers sit in.
  4. Pavers and cuts. Laid in the chosen pattern, with edge pieces cut to fit.
  5. Edge restraint. A buried edge that stops the pavers from creeping outward over time.
  6. Joint sand. Usually polymeric sand, which hardens between the pavers to resist weeds, ants, and washout.
  7. Slope. The finished surface falls away from the house, about 1/8 to 1/4 inch per foot, so rain runs off instead of toward your foundation.

Most failing patios, with sunken corners, heaved edges, or pavers that rock underfoot, trace back to a thin base or a missing edge restraint. The heavy Piedmont clay under much of Northern Virginia and Montgomery County holds water and moves as it freezes and thaws, so the base matters even more here than in sandier parts of the country.

Want to see the materials for your size? Our materials calculator works out the number of pavers, the stone base, and the bedding sand for any patio.

What pushes the price up or down

Size. Every job has fixed costs: equipment delivery, layout, and cleanup. A 120 square foot patio usually costs more per square foot than a 400 square foot one.

Access. Rowhouses in DC and townhomes in Arlington and Alexandria often have no side yard. When every load of stone has to move by wheelbarrow through a narrow gate, labor goes up. Wide, open access for a compact loader brings it down.

Slope, steps, and walls. A flat yard is the cheapest place to build. On a slope, the patio may need a retaining wall or steps. Our planning range for walls is about $45 to $85 per square foot of wall face, so a 20 foot long seat wall that stands 2 feet tall (40 square feet of face) adds roughly $1,800 to $3,400.

Paver choice. Standard concrete pavers are the most affordable. Large format, tumbled, and permeable pavers cost more. Natural stone such as Pennsylvania bluestone or flagstone costs more again.

Pattern. A simple running bond needs few cuts. Herringbone, circles, and contrasting borders need many more, which adds labor and about 10 percent extra material for waste.

Demolition. Removing an old concrete slab or a wood deck adds labor and hauling fees.

Drainage and extras. Channel drains, buried downspout lines, a fire pit, seat walls, and landscape lighting each add to the total, and they are far easier to build in at the start than to add later.

Pavers, poured concrete, or natural stone?

Option Upfront cost Repairs Good to know
Concrete pavers Moderate Single pavers lift out and reset Huge range of colors and sizes
Poured or stamped concrete Often lowest Cracks are hard to hide Road salt and freeze and thaw cycles can flake the surface
Natural stone Highest Depends on the setting bed Bluestone and flagstone suit older homes and historic streets
Permeable pavers Higher than standard Same as pavers Lets rain soak through a deeper open stone base

Our region gets many freeze and thaw cycles every winter, plus road salt tracked in from the street. Pavers handle that movement well because each unit can shift slightly without cracking, and any one that settles can be lifted and reset.

Permits, HOAs, and stormwater rules

Rules differ between DC, each Maryland county, and each Virginia county and city. A ground level patio often needs no building permit, but these situations commonly trigger a review:

  • A retaining wall above the height your jurisdiction allows without a permit
  • Work in a floodplain, or in a Chesapeake Bay Resource Protection Area in Virginia
  • Adding enough hard surface to exceed a lot coverage limit or a land disturbance threshold
  • Properties in historic districts, which are common in DC, Old Town Alexandria, and Takoma Park
  • Anything in public space, such as the strip between the sidewalk and the street

If you live in a community with a homeowners association, get architectural approval in writing before you book a start date.

Hard surfaces also affect your bills in some places. DC and Montgomery County charge homeowners stormwater fees tied to the amount of hard surface on the lot, so a large new patio can nudge that charge up. Permeable pavers and rain gardens are the usual ways to offset it, and some local programs have offered rebates for them.

Before any digging, buried utility lines have to be marked. In Virginia, Maryland, and DC you reach Miss Utility by calling 811, and a professional installer should place that request for you.

How long it takes and when to build

Once materials arrive, a 300 square foot patio with no walls usually takes 3 to 5 working days. Walls, steps, and lighting add time.

Patios can be built most of the year in this region. Frozen or waterlogged ground is the main thing that pauses work. Booking in winter often gets you on the schedule before the spring rush, when many installers are booked out for weeks.

Questions to ask any patio contractor

  • How deep is the stone base, and how is it compacted?
  • What edge restraint do you use?
  • How much slope will the patio have, and where will the water go?
  • Is the joint sand polymeric, and how is it installed?
  • What does your workmanship warranty cover, and for how long?
  • Are you licensed? Virginia's DPOR, the Maryland Home Improvement Commission, and DC's licensing office all let you look up contractor licenses online.

A solid written estimate lists the square footage, base depth, paver style, wall and step details, drainage work, and cleanup. If two quotes are far apart, compare those lines first.

Get a number for your yard

Start with the yard planner for a planning range, or request a free on-site estimate and we will measure, talk through layouts, and give you a written price. We build patios, walkways, and retaining walls across Fairfax, Arlington, Alexandria, Lorton, Bethesda, Silver Spring, and Washington, DC.

Frequently asked questions

How long does a paver patio last?

With a proper base and edge restraint, decades. If a tree root or settling creates a dip, the affected pavers can be lifted, the base corrected, and the same pavers reset. That repair is not possible with poured concrete.

Can pavers go over my old concrete patio?

Sometimes. If the slab is sound, already drains away from the house, and there is room under the door threshold for the added height, thin overlay pavers can work. A cracked or sinking slab should come out first, or the new surface will follow the old cracks.

Is polymeric sand worth it?

For most patios, yes. It hardens between the pavers, which slows weeds and ant hills and keeps summer downpours from washing the joints out. It has to be installed on a dry surface and activated correctly, or it can leave a haze on the pavers.

Are permeable pavers worth the extra cost?

They make the most sense where water has nowhere else to go: small lots, low spots, areas near downspouts, or places where stormwater fees and rebate programs reward them.

More from The Groundwork